The Dunsley Highlander 3 Enviro-burn Multifuel and Woodburning Stove
The Dunsley range of stoves are designed and manufactured in Holmfirth, West Yorkshire.
Designed to give you a cleaner burn and superb efficiency, the Highlander 3's appearance and superb air wash (to keep the glass clean), gives it an appearance to be desired
With a compact size and low heat output of up to 3.3kW, the Dunsley Highlander 3 enviro-burn multifuel woodburner is an ideal stove for heating smaller rooms
As with the Highlander 7 and 5, the Highlander 3 multi-fuel stove has been designed to give you a cleaner burn and superb efficiency. Its slim appearance and superb air wash gives it an appearance to be desired
The air wash and primary air controls are designed to be precisely controlled, to allow maximum efficiency to be obtained and control outputs to your requirements.
The Dunsley Highlander 3 Enviro-Burn stove has a multi fuel grate capable of burning both wood and smokeless fuels and is DEFRA Approved for use in smoke control areas.
The Highlander 3 stove is available with an optional matching canopy. This can be removed or replaced at any time. The Highlander 3 has interchangable top or rear flue outlets fitted as standard, to take a 125mm (5") flue pipe.
The Highlander 3 has been designed with one door to open for re-fuelling and ash removal, therefore no safety precautions are necessary to prevent over-firing of fuel when removing ash from below the grate
The Highlander 3 will take logs up to 200mm (8") long.
The super air wash system has been designed tp keep the glass clean to give a full view of the superb flame pattern, created as the flames rise to meet the incoming air, thus causing secondary combustion to take place.
A steel boiler or stainless steel boiler option is also available. This takes the place of the rear firebrick and can be installed by Dunsley if ordered with the stove, or can be fitted at a later date if required.
The Highlander is a traditional wood burning and solid fuel stove manufactured from the very best material, finished in a heat resistance metallic black stove enamel paint and fitted with either black or brass handles at no extra cost.
The firebox is lined with high temperature firebrick, the bricks have been pressure cast for longer life
This stove is supplied with a FREE installation kit and Fire Starter Kit saving you up to £100
Call us now on 0113 2555622 for more information
|Door Style||Single Door|
|Fuel Type||Multi Fuel|
|Stove Output||3 KW|
|Flue Outlet Size||5"|
|Suitable for 12mm Hearth||Yes|
|External Air Manifold||No|